Any other ideas? Or where else I can find some help on this issue. If you want to clear the cache, remove the contents of HKEYCURRENTUSER Software Novell Messenger Login in the Windows registry. [email protected] 5/4/06 3:51 PM It just happens on 1 pc. It was working fine with the previous client 1.x So mentioned cached?
Where can I clear it. I 've uninstalled - and reinstalled and still the same thing.
As a temp fix, I added the /u-username /p-password onto the startup executive file. This is definitely not normal. If it tries to log in automatically and fails, it prompts you for a user ID and password. If it 's not doing that on your machine then we should try to figure out what 's causing it. Does this happen on every workstation or just on one? Tell me if this is wrong: Messenger starts. It tries to log in automatically.
(You must have a cached user ID and password from a previous Messenger version or it wouldn 't do this). You press cancel.
Does it still show 'connecting ' here, or do you get prompted for a password? It may still be waiting for a response from the server, so you might just need to wait a few seconds. It should prompt you for a user ID and password shortly after pressing Cancel or after you wait for the login to fail.
[email protected] 5/4/06 11:34 AM After installing the lastest windows messenger client 2.01, the client starts up automatically (which is good/normal), but then it tries to authenticate automatically as well (with no username/pw). Of course, it returns the error not a Valid user/pw. I click cancel to login but it goes in that loop never allowing me the chance to actually enter in a valid user/pw. Do you have MBAM installed? Check Proxy settings In Internet Explorer, Go to, Tools Internet Options. Connections Lan settings, Use a proxy server. If it had been ticked, then.
Remove that check. Make sure automatically detect settings is enabled.
(Marked) Regards,TamimLocation - Dhaka Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hourIf one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please 'Give Kudos' at the bottom of my post, so that this information can benefit others. Good morning,hope someone can help with my problem on a Server 2003:The login screen of my Server 2003 (works a a DC) appears like the following screenshot:problem occours when trying to login at the console as well as remote desktop login. Using the keyboard to type in username and password without seeing something let me do the login correctly.I just installed the latest drivers (It's a MSI board with onboard Intel Extreme Graphics 2 Card) but that changed nothing.Thanks!(Woly). Ive used, 3 different computers, wait.
4 different computers. To play on sl.
I have wireless internet (that is right next to my comp and only Im on) so I have great signal strength. But sometimes when I login to my account, I cant get past the 'downloading clothes'. It freezes, not responds.
And sometimes gives me a msg states that its either the land or my internet. But yet, most of the time, i have np's logging in. I wish there was a way I could stop this from happening. It's been 3 days since Ive been able to get on now. Ive even shut off my firewall just to test this but thats still not helping. Two Ebiz suite applications DEV and r12TEST is located on same box.
R12 test is running on port 8025 2. DEV is running running on port 8023 3. Trying to access r12test login page on 8025.
The login page is fine 4. Trying to access DEV login page on 8023, the login page redirection gives an error message 'Unable to generate the forwarding URL. Exception CRC length 68'. The urll show port 8025 5.
Shutdown r12test application and now try to access DEV login page it is working fine. Bring up r12test instance, try accessing dev login page again getting the same error. Hi All,We are trying to acheive the below functionality with Autologin. In our portal we provided 2 links 1.
To view folder list by giving a URL which specifies a folder id. Login to webtop Step1When user clicks on first link, folder list is getting displayed and able to navigate through folders using a configured user credentials (Auto Login).
Session is not getting released when user closes the brower.Step2When user clicks on the second link (login to webtop link), then webtop main component is getting invoked without prompting for login component using the session established in the first step. Thanks in advanceRegardsSiva. Hi All,We are trying to acheive the below functionality with Autologin. In our portal we provided 2 links 1.
To view folder list by giving a URL which specifies a folder id. Login to webtop Step1When user clicks on first link, folder list is getting displayed and able to navigate through folders using a configured user credentials (Auto Login). Session is not getting released when user closes the brower.Step2When user clicks on the second link (login to webtop link), then webtop main component is getting invoked without prompting for login component using the session established in the first step. Thanks in advanceRegardsSiva.
In single user mode use the command 'dsenableroot'. For more options check the man-page of it ('man dsenableroot').That should enable you to log in as root at the GUI. Did I get that right? You're using FileVault?
No good idea! I'm not a longtime Mac-User, but what I've learned in this short period is that FileVault does more harm than it does good. I've seen more than one.sparseimage to break be it out of the need to repair the hard disc or be it out of nothing. In any case the content of the encrypted image was not to be recovered and lost forever. In case you're able to login as root you might want to try to open the.sparseimage of your default user. The OS should ask you for your user password and then try to mount the filesystem that's within the encrypted file. If you see a message saying something like 'no filesystem found to be mounted' you better have a backup.
Otherwise you might be lucky and the data might still be readable. You could reset your default user's password and try another repair with the 'Disk Utility'. Or at least you could check the filesystem because you won't be able to repair the disc while the OS is running. I have a Cruzer Micro 512MB purchased in 2006 with CruzerLock2.1. While trying to re-organize files today, I noted that used space is 246MB, of which almost all is in the SecurArchive.enx file. I am trying to view files using my Windows 7 computer.
Now my problem is that when I launch the ScurDataStor login, I get error, 'ENX6080: Your access to this archive has expired. You may no longer access any of its contents.' How do I reset the expiration date? I am the only user and can't believe that I would set an expiration for myself. (although, I am old enough to forget things from seven years ago and did need help to recall my password.) If I try to 'install' the CruzerLock2.1Install.exe, Install, repair, or update a CruzerLock 2.1 archive on a Cruzer drive, the drop-down doesn't display a drive. If I just try to launch CruzerLock2, I get error, 'Unable to locate a license key on currently available media.
In order to access all of the features available for this archive, please insert the Cruzer media that contains your license key and press Retry. To continue without the key, press continue.' Obviously, this doesn't work or I wouldn't be writing this. I would really like to know what files were so important that I felt they needed to be secured before I discard this small storage device (by today's standards). My old Cruzer mini 1GB came with SanDisk CruzerLock installer v1.1 which made a very useful single Secure folder.but? After a recent injudicious tidying up of files on the SanDisk I can no longer access the Secure folder (which is still there, andwith files that I'm very keen to get at as I'm currently away from home) by clicking on the CruzerLock icon.
Just get the message 'Unable to find the Cruzer, Please verify plugged in'. I've tried to (?re-)install byrunning the CruzerLock Installer again but after 'accepting' the licence agreement it too says 'Drive Cruzer Plugged-in: NO CRUZER!' .anything I can do to regain access? Windows password problem with ACS 3.3(2).
Yesterday afternoon at my office, when I login to Winodws 2003 network, it told me my password will expire in 10 days, and asked me if I want to change it. I just clicked the cancel button. Then when I went home and try to login with VPN, I could not login in, and the error message is something due to incorrect password. I tried to login few times, and my Windows acccount finally got lock out. I think when I login through VPN, Windows network asked me to want change the password; however, Cisco ACS 3.3(2) build 2 does not how to handle that.
Is this a known issue in ACS of this version, or there is something I can do to fix this problem. I would like to inform you that RADIUS Password Expiry is supported with External windows database using MS-CHAPv2. We cannot use RADIUS Password Expiry with local ACS database.
I've attached a link for your reference. Link for Configuring the Cisco VPN 3000 Series Concentrators to Support the NT Password Expiration Feature Using the RADIUS Server: 00800946b9.shtml Please provide more information about your network, like which db, NAS, authentication you are using, Regards, JG Do rate helpful posts. Launchpad wants to do an update. And it admonished me back up my data before proceeding. And the installer claimed it would also back up my data. How do I back up the data on my Cruzer? There are 2 folders on the device (U3 System) and also just the Removable Disk with what appears ot have all the data.
I am particularly concerned about the installed applications, and more importantly the encrypted files for SignupShield and CruzerLock. Can I drag the contents of the Removable Disk folder somewhere and drag them back, and everything will work as before? Launchpad wants to do an update. And it admonished me back up my data before proceeding.
And the installer claimed it would also back up my data. How do I back up the data on my Cruzer? There are 2 folders on the device (U3 System) and also just the Removable Disk with what appears ot have all the data.
I am particularly concerned about the installed applications, and more importantly the encrypted files for SignupShield and CruzerLock. Can I drag the contents of the Removable Disk folder somewhere and drag them back, and everything will work as before?
Surprise, surprise. Well this can't be a coincidence. As I said, the exact same thing has been happening to me. It just keeps saying 'Querying Facebook'. Spoke to about three different Activision Support guys who all keep telling me the same thing; Go to Elite on your PC, unlink your account, delete the app from Facebook, delete the Internet cache and start all over. So basically, I kept losing all my stored Internet passwords everytime I did this. The last two guys told me it's because I was using Internet Explorer and to install Firefox instead!
I'm not installing a whole new Internet browser just to use a small feature on your console game. If it's a compatibility issue, then Elite should have been tested with all browsers before release. Also to make matters worse, the Elite webpage decides on it's own from time to time, which version of the support page to load up for you. The US one has the chat option and you can see your support history. The UK one which it periodically changes to is just a mess and confusing.
The tech guys I think are just really young and inexperienced as they don't appear to have a clue. I gave up after the 4th tech guy but part of me is still really determined to get this resolved by them. I've looked all over the net for solutions and this thread was the only instance of a similar problem. Ok fair enough it's a small problem.
But it would be easier than having to go and manually upload every clip to YouTube, then switch over to the PC and 'then' post them to your Facebook wall. As the guy in that famous Honda ad says. 'Isn't it great when everything just. I have 2 webapps packed within an.EAR file. Im using a custom login module that extendsDatabaseServerLoginModule`. My problem is the following: if I log into the 1'st app - my call will go through my login module but if I want to log into the second app while I`m still logged in the 1'st app the login module doesn't get called (this if I pass correct credentials - otherwise the login module is called and the login refused).
Has anyone had such issues before? Would it be possible for JBoss to cache the credentials? Problem: two users, both admin, one works fine, one does not. When I attempt to login with the one, I select the icon, type the correct password (I know it is correct), the login panel goes away, I see the standard blue background as if login is proceeding and there is a 2-or-3 second pause, and then the login panel replots. At that point I can login to my other user, but login to the problematic user never works. I have root enabled, and can login to it. I created another user after repeated attempts to login failed; I can log in to it just fine.
I need the problematic user back because it has my work files. Problem: two users, both admin, one works fine, one does not. When I attempt to login with the one, I select the icon, type the correct password (I know it is correct), the login panel goes away, I see the standard blue background as if login is proceeding and there is a 2-or-3 second pause, and then the login panel replots.
At that point I can login to my other user, but login to the problematic user never works. I have root enabled, and can login to it. I created another user after repeated attempts to login failed; I can log in to it just fine.
I need the problematic user back because it has my work files. I just means 1. Company ABC, I create Portal ABC 2. Company ABC has IT Department, I create Portal IT 3.
Both of portal open for anonymous 4. I login Portal IT and change to Portal ABC 5. I'm employee of IT in Company ABC 6. If I have not permission on Portal ABC, I should have permission level as same as anonymous 7. May be force logout Portal IT and login Portal ABC 8. I change into Portal IT, I must login again Ammmm. Thank you Aaron, If I use same AM/Portal instance.
I should use SAML? Or SAML can solve this problem. (I don't have knowledge about SAML). Hello,I'm using Skype for a long while on Ubuntu 11.10. Never had a problem before. I have 2 accounts on my PC: A and B. Respectively I have 2 Skype accounts i.e.
One for A and another one for B.Today I started to have a problem to login to Skype account A.Here are the steps: 1. Reboot the system and login as A. Start Skype and try to login as Skype A account - got error ' Another Skype instance may exist' and failed. Kill all skype process and try again. Got the same error. Try to login to Skype B account and don't have a problem.2. Login to PC as B.
Start Skype as B account and don't have problem. Sign out from Skype and login as Skype account A and don't have a problem. Bottom-line: using account B I don't have problem to login into Skype using A or B account.using account A I don't have problem to login into Skype using B account but have problem to login as Skype A account. Note: reinstall of Skype didn't make a difference. I could login as Skype A account from my tablet or from Web.Any idea what could be wrong?Appreciate any help. Hello,I'm using Skype for a long while on Ubuntu 11.10.
Never had a problem before. I have 2 accounts on my PC: A and B. Respectively I have 2 Skype accounts i.e. One for A and another one for B.Today I started to have a problem to login to Skype account A.Here are the steps: 1. Reboot the system and login as A. Start Skype and try to login as Skype A account - got error ' Another Skype instance may exist' and failed. Kill all skype process and try again.
Got the same error. Try to login to Skype B account and don't have a problem.2. Login to PC as B. Start Skype as B account and don't have problem. Sign out from Skype and login as Skype account A and don't have a problem.
Bottom-line: using account B I don't have problem to login into Skype using A or B account.using account A I don't have problem to login into Skype using B account but have problem to login as Skype A account. Note: reinstall of Skype didn't make a difference.
I could login as Skype A account from my tablet or from Web.Any idea what could be wrong?Appreciate any help. Did you by any chance change the IP address of the CRS server. IF so, then you could be facing the know problem CSCdy82034. Check the bug ID in the bug tool kit on www.cisco.com for the solution.
Re-installing the CRS server will help the problem to be solved in this case. If this is not the case then, it could be due to user profiles. Do the following to resolve it: 1.Creating the user and assign the devices on Callmanager. Go to the CSQ Resource menu, 3. Do a show resource and update. At this moment the user may not be able to log in at first (user not found), 4.
Reboot the server. Now log in to the IP Phone agent using the same username and password. With this you should be able to successfully login to the IP phone agent.
I have a question regarding authenication via CLIENT-CERT and FORM based. I'm trying to figure out the best way or any way to setup a mutli login configuration where the user can choose how they want to login (Client Cert or Form Based). Currently, I can set the web.xml file in portal-server.war to the followng and login via form: login-config auth-methodFORM/auth-method realm-nameJBoss Portal/realm-name form-login-config form-login-page/login.jsp/form-login-page form-error-page/login.jsp/form-error-page /form-login-config /login-config I can also change it to the following and login successfully via cert: (using BaseCertLoginModule and custom module to get role info) login-config auth-methodCLIENT-CERT/auth-method realm-nameportal/realm-name /login-config Problem is I want the user to be able to click one of 2 links to login.
Link 1 will log the user in via FORM and Link 2 will log the user in via CERT. Is there a way I can do that. BTW, I'm not using a LDAP as user DB. I'm only using Oracle. We have installed and configured ADFS 3 with CRM 2013 as following: ADFS server where ADFS 3 is installled on Windows Server 2012 R2.CRM 2013 server configured for IFD installed on Windows Server 2012 R2.We have an ASP.NET application uses single sign on (as the example found in CRM SDK 2011).
Case 1: Login to ASP.NET web application, loads login form once, then open CRM without login. (Works fine) Case 2: (problem) Login to CRM, loads login form once, then open ASP.NET web application displays login form (repeatedly prompt for authentication).
We have attached the following two screen shots for Case 2. Case 2 - Step 1 Case 2 - Step 2 (trying to login to custom page prompts repeatedly for authentication) We are stuck in this issue for more than 3 weeks now, we really appreciate your help. Islam Eldemery. I have an older Sandisk 128mb flash drive running Cruzerlock 1.0.0.1, and as I haven't used the encryption software in years, I've forgotten the password, making it impossible for me to access some files I encrypted way back when. From what I've read, there's no password reset or recovery feature. I want to reformat the drive and reinstall the software, butI can't find a reputable link to Cruzerlock 1.1 for the life of me; only version 2. If someone could give me a download link to the version I need I would very much appreciate it.
I have backups of these files, but they are encrypted too. Thanks in advance! I have an older Sandisk 128mb flash drive running Cruzerlock 1.0.0.1, and as I haven't used the encryption software in years, I've forgotten the password, making it impossible for me to access some files I encrypted way back when. From what I've read, there's no password reset or recovery feature. I want to reformat the drive and reinstall the software, butI can't find a reputable link to Cruzerlock 1.1 for the life of me; only version 2.
If someone could give me a download link to the version I need I would very much appreciate it. I have backups of these files, but they are encrypted too. Thanks in advance! Did you perform an upgrade of CCM and changed the password for dc directory and administrator (or CCMAdministrator)? If you did change the passwords, you need to run the directory plugin again.
Next on the publisher, go to a command prompt and type in CCMPWDChanger. The utility will open up.
You will have to give it a second or two and put in the AD password. In the next screen change the CCMAdmin and CCMSysUser passwords back to the original password prior to the CCM upgrade when EM was working. Restart the EM and Tomcat service when done. I had the same error, when I did an upgrade of CCM3.3.3 to 3.3.4, and decided to change my passwords.
Here is a helpfull link. Hope it helps http://www.cisco.com/en/US/products/sw/voicesw/ps556/productsinstallationandconfigurationguide11aa73.html#wp44053. We`re using a WLC 5508 with SW 7.2.103.0. The most things are working fine, but i have a problem with the web auth. Setup: - Max Concurrent Logins for a user name is set to 1 - Max-Login Ignore Identity Response is set to enable - Web Authentication Type is set to customized The Problem: - the user 'test' is logged in at device1 (working), the same user 'test' try to login at device 2 (is not working, fine!) - login is not accepted, WLC redirects to the INTERNAL Web Login Page The problem is the redirect to the internal web login page after failed login. If i try to login with a not existing user, the redirect is working perfect to the customized web login.
Hi, Sorry for the inconvenience that caused by this encountered issue, I have received your email and replied to you, as this specified issue may not be resolved conveniently in forums, we will work together via emails. Best Regards, Ming Xu We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate the survey. Sharepoint 2013 with SP1, I enabled anonymous, and use FBA and NTLM. For FBA user, the login / logout works fine: 1.
Logout and then click login again, it go to login page, which is what we want 2. Login and close the browser, then open browser and open site url, I have to login again,which is what we want The problem is with NTLM user 1. Login(Note: Remember me is not checked.), then logout and then click login again, I login with the previous user credential again, no need to input anything. 2.Login(Note: Remember me is not checked.) and close the browser, then open browser and open site url, it automatically login with previous user, no need to input anything.
This is a big security problem for us. Is there any fix for this? Hi, weve got 2 WLCs (6.0.182.0) and 22 APs in our wireless environment. Last week it was not possible to login to our weblogin. The login page was not reachable. We identified an error on the internet connection to our provider. Only after solving this problem it became possible to login.
I dont untderstand the relation between login on wlc and the internet connection. Why doesnt the wlc display the login-page? I havent found any documentation to this case. Does anybody else know this behaviour?
DNS is not required for the 1.1.1.1 page, unless you assigned a FQDN name to the virtual interface and you issued a WebAuth certificate based on this FQDN. In this case you should get redirected to the. Which requires DNS to be operational. But if you normally get the redirection page to, then this should have worked. But I would suggest to check with a packet capture on the client itself what happens at that time when the internet connection is down.
Cheers, Federico. Hi Everyone, I have to find all possible solutions to below problem: Problem: User should not be allowed to login 2 times to an application from same machine. Steps to produce the problem: 1) User 1 logins to application. 2) User 1 tries to login with different credentials from same machine. 3) User 1 should be presented with a message that he cannot login from same machine using 2 browsers. 4) User 2 tries to login to application with credentials of user 1.
System should now display an alert to both users on System 1 and System 2 of this conflict. Please share your thoughts regarding above problem. Thank you Edited by: rishab.garg on Feb 25, 2009 10:53 PM. When a user logs in to application flag it in database. Irrespective of client machine and browser when another user tries to login using same user id you will be able to identify that easily using stored flag against the user id.
If you want to distinguish between client machine for displaying different messages you can easily do this by comparing client IP address. To obtain client IP address use: request.getRemoteAddr;Note that getRemoteAddr might return last proxy machine's IP address (in case proxy is used) instead of client's machine.
In that case you may consider using cookie (though using cookie is not a great idea). Thanks, Mrityunjoy Edited by: mrityunjoy on 28 Feb, 2009 11:43 PM. I have Cruzer micro 8Gb. I'm use CruzerLock2.1 on this device. On desktop with WindowsXPpro it's working properly, but I'm have problem on Laptop with Windows Vista HomeBasic.
WhenI'mpush disk to the laptop,I have this one: 'Unable to locate a license key on currently available media. In order to access all of the features available for this archive, please insert the Cruzer media that contains your license key and press Retry. To continue without the key, press Continue.'
Has anyone else encountered this problem and if so how did you fix it? Thanks Best regard. We have faced an irritating problem with EPM 11.1.1.3. After you have given your user name and password in the login screen, it can take anything between 2 seconds and 2 minutes, before the Homepage screen appears.
Meanwhile you have just the normal 'Authenticating User' text on the screen. In most cases it is the first login of the day, which last longest, but not always. The problem occurs both with Native Directory and Active Directory users. Also the amount of users in the system, when you login, does not seem to make any difference. Any ideas how to solve the problem?
Windows Yuppie Flu version, recent Netware Client, Netware 6 server SP1 Occasionally a user logging in at a customers gets a problem. LOGIN-4.21.15-470: The specified drive mapping is an invalid path: (Lists a valid path) Capture appears in the box Then Nalstart popup Nalstart has caused an error in ZENAPP32.DLL Nalstart will now close After this Error returned from '#CAPTURE L=2 Q=PSERVER1Q2 NFF NB TI=5 ' command: 43 LOGIN-4.21.15-740: This utility could not not execute external program CAPTURE.
At end of login script LOGIN-4.21.15-923: An unexpected error has occurred: 15 (8809). In article [email protected], Martin Imber wrote: Windows Yuppie Flu version Sorry, but. Recent Netware Client What version, and for what OS? The rest of your message continues to be just as ambiguous as the above. Given the info we don 't have here, I 'd suggest checking the protocol installations and NIC driver on the client, reinstalling the client, and perhaps reinstalling whatever version of ZEN you 're trying to run. Oh, and rather than installing over the existing bad stuff, remove, reboot, then reinstall.
Bd NSC Volunteer SysOp www.InsightNetSolutions.net. Good morning,not sure if this is the right place to ask my question about Server 2003 an a problem with login.The login screen of my Server 2003 (works a a DC) appears like the following screenshot:problem occours when trying to login at the console as well as remote desktop login.
Using the keyboard to type in username and password without seeing something let me do the login correctly.I just installed the latest drivers (It's a MSI board with onboard Intel Extreme Graphics 2 Card) but that changed nothing.Who can help?Thanks!(Woly). Hello, I'm using Seam 2 for my work and I'm quite new to it. I have a little problem with login in Seam 2.2. I want to do a auto login (with waffle's single-sign-on) first and only want to redirect to login page if auto-login fails. What should I do?
I've observed that everytime I access a restricted page without authorization, Seam throws an NotLoggedInException and a NotLoggedIn event, and redirect me to login page. I've tried some workarounds but they doesn't really look right. Currently I don't know yet how to catch the NotLoggedInException before the restricted page is redirected by Seam. Please help me.
Thank you very much Hoang Edit: Only pages with 'login-required' do the login procedure. Hi all, our customer using Zenwork to push their policy in every department.Right now, 1 of department got a problem.the rest is ok.in every department also, user used their group policy.but some of user facing this problem: 1.
Login slow and windows freezing a few minutes after login novell. User need to wait 2-3 minutes before starting any works. Windows freezing a few minutes after re-login due to screen saver (setup in policy-5 minutes idle lock) What is your opinion,guys. Whether it is cause of policy setting or anything else? If it is due to policy setting, maybe i have to re-check their policy setting.what we are confused now, we were use the same policy once using ZDM as before.Once migrate to ZCM 10.3.2, the problem come out. Azizam81, It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options: - Visit and search the knowledgebase and/or check all the other self support options and support programs available. You could also try posting your message again. Make sure it is posted in the correct newsgroup. (Be sure to read the forum FAQ about what to expect in the way of responses: If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot. Your Novell Product Support Forums Team http://forums.novell.com/.
Hi if you want in the new page you have to set the target like this i am showing following example through which you can get it - html head titleSHOPPING CART main Menu/title /head body Products br br br Place an Order br br br Display My cart br br br My Previous Orders br br br Log out/body /html - for logout.jsp hyper link i have set the target as TOP which shows out put in the new page other wise it would have shown in same page. Uninstalling the cZCM Agent and all Casa-Installations and after that reinstall the agent is working now! Best regards Bernd Kauer Originally Posted by AndersG Berndkauer, i have update my server to 10.3.3.
After that i have update my Workstation (win7) to 10.3.3. After the Novell-Client login (2 SP1 IR7) i have to login to ZCM. But the lgoin fails with the message: Login to netzwork not possible. The userdata or the certifiacte are wrong.
How can i solve my problem? That is a known problem when updating to 10.3.3. Some oc the CASA files are not updated, causing Zenworkswindowsservice.exe to crash.
In my case the easiest fix was tio uninstall the agent, run the ZCm cleanup utility and reinstall the agent. Anders Gustafsson (Sysop) The Aaland Islands (N60 E20) Novell has a new enhancement request system, or what is now known as the requirement portal. If customers would like to give input in the upcoming releases of Novell products then they should go to http://www.novell.com/rms. Mark, I suspect I 've got a problem accessing the LDAP server but not sure where to start looking.
IFolder simple troubleshooting steps: 1. IFolder 2.x needs eDirectory 8.6.2 or better for LDAP. It will not work with NW 5.1 DS 8.82 for example. Check that the admin name in the iFolder server config file is correct 3. Use the clear-text LDAP (389) port for troubleshooting (SSL/TLS tab, turn off require TLS, see below) 4. Have iFolder log its screen to a file (below) 5.
Turn on LDAP tracing on the LDAP Server Object (Screen options tab, check at least connection and response) 6. LOAD DSTRACE.
Speech pathology post baccalaureate programs california. The post-baccalaureate program in communication sciences and disorders provides in-depth study of normal speech, language and hearing processes, and a background.
Turn off everything and turn on LDAP, then try to log in. Does it work if you bypass the proxy in your browser? Does the new iFolder help? (This is for 6.0. For 6.5, use SP2) Note on 4: Change startifolder.ncf to read: LOAD ADDRESS SPACE = IFOLDER APACHE -s -f SYS:APACHE IFOLDER SERVER HTTPD.CONF (all on one line) Note on 3: 1. LDAP Server Object, SSL/TLS Config Page Untick Require TLS for All Operations 2.
LDAP Group Object Untick Require TLS for simple binds with password Note on 6: LOAD DSTRACE DSTRACE -ALL DSTRACE +LDAP DSTRACE SCREEN ON DSTRACE FILE On The trace file is called DSTRACE.LOG and is in sys:system For some helpful tips: - Anders Gustafsson, Engineer, CNE6, ASE NSC Volunteer Sysop Pedago, The Aaland Islands (N60 E20) Novell does not monitor these forums officially. Enhancement requests for all Novell products may be made at Using VA 5.51 build 315 on Windows 2000 build 2195.
I have a sandisk cruzer that only a few months old. It is the 8gig model and I love it or should I say I loved it.
I use to store passwords and files when moving between offices and customers. It has confidential data that is all password protected. Last week it stopped working, i.e. The U3 software doesnt start and also the red / orange light that starts flashing away when it is in use doesnt work anymore. In disk manager is shows a 16MB partition? I have tried a few tools and nothing can find any lost partitions? I cannot reformat it as it doesnt see that it is an 8gn drive.
Any suggestions or special tools to try? Had a look around but couldn't find any threads with the same problems. I've had a Sandisk 8GB Cruzer for about a year and has always been fine. Last week I put some music on the drive and gave it to my dad. Gone baby gone 2007 trailer. I have just put the drive back into my laptop and it is telling me the capacity of it is 3.73 GB? All of the folders on the drive have been replaced and named things like 'mbb2files', and inside these are really small files and images such as the facebook logo?
Not sure what is going on here!? Could this be something that happens if you don't safely remove or something? Any help would be greatly appreciated. This type of USB drive isn't very expensive so I don't mind having to buy a new one, I was just curious as to what might have happened to avoid it happening in future.
Matlab program hardy cross. Objectives_template Chapter 11: Applications of Viscous Flows Through Pipes Lecture 35: Pipe Network: Solution by Hardy Cross Method • The distribution of water supply in practice is often made through a pipe network comprising a combination of pipes in series and parallel. The flow distribution in a pipe network is determined from Eqs(36.9) and (36.10).
The answer to your problem is a soft called Active@KillDisk,ive actually just finished using it on a 16Gig Flash drive whos capacity was down to iGig. Run Active@KillDisk and in the tree on the left pick out your FlashDrive and tick all the appropriate boxes,then go up the top to the button bar and click on Kill its a slow process but let it do its job,it took me just over an hour for the 16Gig. Once Active @KillDisk has finished all you have to do is reformat the FlashDrive,you may have to use another computer for this for some reason my computer wouldnt recognise the flash drive but once in another box it was easy to reformat the thing,now its back to its full capacity thanks to Active @killDisk. Aha, well, then the simplest thing to do (if you have files to lose), it is following: 1 - As your Pendrive infected (virus 'AutoRun Recycler'), you have to check before that PCs in the plugs, have an updated Antivirus functioning, and are not infected. 2 - If you can not do this check, do not use any more Pendrive, and gift it to you.
3 - If you can do the testing, see, then plugging that you get any Poster Antivirus and alerting the problem is solved. 4 - Then go to the Start menu and open the 'My Computer' folder. 5 - Here you will see a series of icons of disks, and you choose one that will tell 'Disco external' 8GB or 'Removable Disk' 8GB, etc. 6 - Then click on it with the right mouse button, and the menu comes out, you press the button Left on 'Format'. Attention: Make sure it's your Pendrive 8GB.
7 - You will get a new menu where you choose 'Quick Format', and wait a moment. 8 - Finally, you can 'Open' your USB flash drive, and you will see that it is 'clean'. 9 - And so you can use perfectly and no need to install anything to use it. 10 - Y 'Colorin Colorado', este cuento ha terminado. Regards, Alfred. (translated by Google). I was the happy owner a 8gb sandisk extreme contour but someone managed to steal it from me.
So time to look for a new drive. When i look for 32/64gb drive, i came across a lot of name like: Cruzer Blade Cruzer Edge Cruzer Slice Sandisk Ultra Sandisk Ultra Backup.
Can someone please enlighten me to as the differences between all of them since I am quite lost with the new terms? I will be out of UK by end of June and need to make a choicebefore that. What online site offer the lowest price for the sandisk? Hello, I'm a long time Sandisk fan user, but in these last months I'm very disappointed with sandisk products. For example: - I buyed a Cruzer Edge 16GB.
It is very slow compared to my old Cruzer Micro 8GB. Only 4MB/s in writing instead of 8MB/s??? (test are done on the same machine, on the same USB port, and are both FAT32 formatted; tests done with 'h2testw' and other speed test programs) It seems that writing is very high if you limit to write a file of only 8/16 MB, but as soon as you write something bigger (128 MB or more), the speed drammaticaly reduces to 4MB/s. This doesn't happen with the old Cruzer micr 8GB.
the other problem (always on speed) is on a new microSD 'Ultra' (???) 8GB card (class 10!!) on my Android phone; it is slower that my old Sony 4gb (class 4) (I will post my tests on the forum) I think that Sandisk has to reconsider its production process:-(. Hello, I'm a long time Sandisk fan user, but in these last months I'm very disappointed with sandisk products. For example: - I buyed a Cruzer Edge 16GB. It is very slow compared to my old Cruzer Micro 8GB. Only 4MB/s in writing instead of 8MB/s??? (test are done on the same machine, on the same USB port, and are both FAT32 formatted; tests done with 'h2testw' and other speed test programs) It seems that writing is very high if you limit to write a file of only 8/16 MB, but as soon as you write something bigger (128 MB or more), the speed drammaticaly reduces to 4MB/s. This doesn't happen with the old Cruzer micr 8GB.
the other problem (always on speed) is on a new microSD 'Ultra' (???) 8GB card (class 10!!) on my Android phone; it is slower that my old Sony 4gb (class 4) (I will post my tests on the forum) I think that Sandisk has to reconsider its production process:-(. Hello,I hav a sandisk cruzer blade 8gb thumbdrive,i don knw suddenly wht ahappened to it,now its not at being recognised on my system or elswhere.pls help me as i hav lot of data on it.i m even unable to formate it bcz whn i press right click n press on format it wont take the comand at alll. Its not taking any command, in if plugin into USB it shows as 'removable disc' but not with name whn i click on properties it does not show availbale space n says this device is working properly.Pls help me to atleast format it show that i can use it further. Kindly reply by mail = [email protected] thanks and regards.
Hi there, Couple of weeks ago we received the new SanDisk Cruzer Ultra flash drives that were supposed to be the fastest Sandisk flash drives as Cruzer Titanium and Contour were discountinued many time ago ( I never understand why, they were excellent flash drives). We opened a 8Gb Cruzer Ultra, SanDisk announces it as a 15MB/s transfer speed (in the retail packaging do not appear if it means read or write speed). We run the Cruzer Ultra with the CrystalDiskMark 3.0 sofware and here are the results: Performance test was made under Windows 7. Maybe SanDisk are referring the 15MB/s to the read speed and not to write speed? Waiting your comments, MemoryVal www.amazon.co.uk/shops/A11I77QYT25RM7www.facebook.com/memoryvalwww.twitter.com/memoryvalwww.memoryval.comwww.youtube.com/memoryval.
From the small print on the sandisk website. Looks like write is only up to 10MB/s and that is only for the first 20MB transfered. Your bench marking tests surly are transferring more than 20MB so they are probably showing the transfer speed after the first 20MB transferred. †† Up to 15MB/s read speed.
Up to 10 MB/sec write speed applies to the first 20 MB of data transfer. Based on SanDisk internal testing; performance may be lower depending upon host device.
1 megabyte (MB) = 1 million bytes.. Hi Alka, It seems that, you are facing issue with using SanDisk Cruzer Blade 8GB USB on your computer. We need some more information to assist you, please answer these questions.
Is this issue confined to SanDisk Cruzer Blade 8GB USB? Did you face same issue with any other USB device? Did you check the issue status by using the SanDisk Cruzer Blade 8GB USB with different computer? Go thought the following information and check the issue status. Code 43: Windows has stopped this device because it has reported problems.
You can also refer to: code: 43 Hope this information is helpful. Please do let us know if you need assistance with Windows, we’ll be glad to assist you. I have a SanDisk Cruzer w/ U3 8GB, and I would like to install Vista on my new SSD from it.
How can I make it BOOTABLE?? I forgot my DVDRW drive overseas, and I want to do a fresh install onto my SSD from the USB drive. I have the source files on my USB Flash Drive. Is there any way to either boot from it? How do I make it bootable?Or should I just install 'over it'?? Even if that's possible, I'd really rather not go that route.
Again, I do not have my DVDRW drive with me. But at least now I can boot from the SSD, and test its performance.
One of which was installing Vista from scratch. I find the boot-time unacceptable, especially the time it takes from when the desktop appears to the time the Welcome screen shows up. It seems to stall, loading something, stall again, and then finally resuming to a workable desktop 'post-Welcome Screen'.Please help!! I just got this drive.
I have USB 2.0. Thanks everyone!
Sandisk
I have bought a new sandisk cruzer blade 8gb.I have copied all the folders and applications came within it.I have not installed them.My OS is windows7 home basic.I have formatted the pendrive and copied a movie in it.From then it became write protected.I could not copy or format it anymore.It is saying that it is 'Write Protected'.What to do? How to remove this protection.? I want to use it as a normal pendrive working with all OS without any problem.My Sandisk is SDCZ50-008GB. The device is formatted as FAT32 and the largest file size FAT32 can handle is 4GB. You have two options, 1.
Convert the format to NTFS or 2. Split your 4GB file into smaller pieces.
If you can't convert the format to NTFS but rather can only do a reformat to NTFS then be sure to backup all the files on the drive including the hidden U3 system folder and restore them after you do the reformat. If you don't backup the hidden system folder you will loose all your U3 apps since SanDisk doesn't have them online any longer. OK I lost my Cruz. I want the inform I have stored in the vault. How can I get back that inform. Also my computer had crashed since I had last used the Cruz and a new hard driver installed.
I have been emailing Sandisk over the last week and they keep sending me here. I do get little bit more inform on my situation but the this speed it will be a few months. All I want to do is get into my vault and get my pics. And tax inform that i foolishly uploaded. If i were to buy another SanDisk could i get into the account and have all my infor.?
EdP wrote: Try RMPrepUSB. If it doesn't resolve the problem you may to resort to manually changing items with TestDisk which of course is risky. Or Tiny Hexer, which is riskier still. I have a 16 GB SanDisk Cruzer, let me see if I can find something useful for you.
RMPrepUSB is quite a nifty thing. It didn't fix the problem, but it was sure interesting to play with.
I tried most all the relevant options. At the end, the drive is trivially smaller than before.:-) Anyway, I have the USBInfo.Txt file. In pertinent part: Disk Signature bytes (1B8h-1BBh) = 12 98 08 00 Partition 1 SIZE=7506.905MiB Type: 0B FAT32 (2047GB max).ACTIVE. START POS = CYL:0 HD:1 SEC:1 END POS = CYL:956 HD:254 SEC:63 START (LBA) = 63 (0000003F) SIZE (LBA) = 15,374,142 (00EA973E) This geometry is now different from what I had before I went all destructo. I had 255/63/973 heads/sectors-per-track/cylinders, with 1563408 sectors, earlier in GParted.
So I have fewer cylinders (and therefore total sectors) now. I'd be mightily interested in what your Cruzer says. I did read in the RMPrepUSB dialogs that the max possible cylinder setting is not at all as high as what I tried in TestDisk before. But I'm more interested in knowing what the sector size on yours is. If it's 1024 instead of 512, that would be an easy answer.
The drive has the hidden second partition that causes the extra 126 MiB at the end versus the drive I cloned. That might or might not account for the 'missing' cylinders. I did the testing a couple of times, once with the tickbox checked for that extra hardware bit, and I can't remember which test this was I'm reporting the results of. Hi, its quite simple.
If you tried it in other computers and it works then its your computer at fault. If the memory stack fails on others it is the memory stick. If it is a problem with the memory stick and its out of warranty you could try opening it up and looking at the solder joints. Constant use, with hot and cold can cause them to weaken and break. You maybe able to add some pressure on the memory stick to 'make' a good connection then take docs off or you may try fixing it yourself. If you wanna have a look at that here is a page on fixing memory sticks. If you dont fancy doing that and are desperate for the content there are companies that offer the service where you pay nothing if they recover nothing from broken devices.
I upgraded my USB stick to an 8Gb Cruzer. Everything looked fine after installing the U3 software and transferring all the data over. But then I tried to connect to open up a browser and connect to the internet and kept getting page not found in the new window for pages I was browsing in the U3 installation window. Turns out that I can now only browse the Internet via the Cruzer stick. I've switched browsers from IE to Mozilla, no change, then upgraded IE6 to IE8 still no change.I'm now only able to browse the net if I first plug in the micro cruzer and then start a connection using the 'sandisk U3 Website' link!
Anyone else had this problem and solved it? Hi, can anyone out there tell me whether or not my 'Sandisk Cruzer Micro U3 8GB(SDCZ6) Device ver 8.02' will run the U3 software on Vista?? Iam at the point of not using the U3 software, even though its pretty great on XP. Basically, as instructed by Sandisk Support, I updated the U3 Launcher to version 1.6.1.2 using an XP machine, great that worked on XP, however it doesnt work using a Vista machine. I constantly get an error message saying that this software only works with XP, 2000 and 2003. Ive done exactly what Sandisk Support stated, but it just will not work. Cheers, David.
How big is the file you are trying to copy to the device? The cruzer is formatted in FAT32 and this filesystem has a limit where each file can be no larger than 4GB. Ifthe file you are transferingis larger than 4GB try using disk utility to reformat the drive as mac os extended journaled then transfer the file. This will make the drive unusable on windows pcs but it will let you transferfiles larger than 4GB. Once you have moved the file you can use disk utility to format the drive back in FAT32 (called ms-dos file type in MAC).
I have had a sandisk cruzer pop for about 3 years now and all of a sudden it has lost all its volumes and partitions and i cant put more back on it, it comes up as being plugged in on all pcs i plug it in on though. Please help i need it for school work. It says its empty and has no files on it but for some reason with microsofts own diskpart it wont let me create a volume or partition on it? And in disk management it comes up as not initilaze but with the button to initialize blurred out.
Sandisk Cruzer Lock 2 Download
I have tried on latest mac OS X and windows 8.1 Please someone help me fix this problem or tell me wether it is faulty because it is still under warrannty. Ok, I surrender. Is it so hard to understand what I'm asking for? One pendrive manufacturer says (for an imaginary pendrive): Max read rate: 50 Mb/s, Max write rate: 30 Mb/s Ok, those are max, theorical, in optimal conditions, read and write rates, those are the hardware max rates. I KNOW that I NEVER will get those rates, but if Sandisk says that they have a pendrive that does: Max read rate: 100 Mb/s, Max write rate: 60 Mb/s. I can imagine that in theorical optimal conditions, sandisk pendrive.CAN.
be twice faster than the other, that's to say, Sandisk hardward, isolated from my MB hardware, isolated from my O.S., is twice faster than the other. In REAL conditions, it's is supposed that Sandisk pendrive is faster than the other (probably not twice faster), but I have information from both two manufacturers and I can compare.
I'm I asking for something too difficult? And I repeat, I prefer Sandisk gives me max theorical transfer rates in optimal conditions rather than Sandisk gives me nothing. The summary of my request is that I'd rather have ANYTHING than nothing. Hi, i purchased a cruzer switch 16gb online and few days ago i stored some data on it of about 8gb. But now when i am using it in windows 7 its not working.
I read many issues related to this on various online forums including sandisk forum and nothing resolved my problem.One of your post stated to uninstall driver and reinstall it, i did the same but i think it get more worse. Befor uninstalling it was showing under usb controller as 'cruzer switch' and now its showing under other devices. I dont know deeply about this drivers, hardwares, softwares stuffs so please guide me.
Sa-mp-0.3x-r1-2-install.exe
If it is any failure on part of the device then, is it the quality sandisk providing to the customers. Kindly help me correcting my device and recover my data asap.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |